Looking to Install Stock ROM on ZTE Blade V Plus? then you are at the right place. Now install the official Stock firmware on ZTE Blade V Plus. ZTE Blade V Plus which under the hood runs on MediaTek processor. Here we will guide you to install the official Stock ROM on ZTE Blade V Plus using the software known as SP Flash Tool, Formally also called Smartphone Flash tool. If you have installed Custom ROM or bricked your device, then this guide will be helpful to fix back to Stock ROM or unbrick it.

Talking about the specifications, ZTE Blade V Plus features a 5.5-inch IPS display with a screen resolution of 1080 x 1920 pixels. It is powered by Qualcomm MSM8939 Snapdragon 615 processor coupled with 2GB of RAM. The phone packs 16GB internal memory with an expandable storage support of 256GB via microSD card. The camera on the ZTE Blade V Plus comes with 13MP rear camera with dual-LED dual-tone flash and 5MP front camera for selfies. It is backed by a Non-removable Li-Ion 3000 mAh battery. ZTE Blade V Plus also has a fingerprint sensor on the back.

Android always opens the door to various possibilities such as flashing custom ROM or kernel or APK modding etc. These feats can be achieved by providing root access to your device or simply rooting your phone.  In today’s date, rooting or customizing is no rocket science, but people perform these process carelessly. Certain users hastily carry out the modding/rooting process without properly following instructions. It leads to bricking of the device. It can happen with any device. In this post, we will tell you how you can restore or unbrick ZTE Blade V Plus back to the previous working condition.

How to Install Stock ROM on ZTE Blade V Plus

The guide is simple and easy! All you have to do is simply download the below-given firmware files and tools on your PC and then follow the given instruction to install the Stock ROM on ZTE Blade V Plus using SP Flash Tool. Yes, this guide is also helpful to recover, unroot or fix any software malfunctioning problem.

Remember this guide is also very much needed in case of upgrade or downgrade the firmware on ZTE Blade V Plus. First of all, download the software, Smartphone Flashtool on your PC and then flash your phone back to Stock ROM. We request you to read the steps carefully before upgrading ZTE Blade V Plus using this guide.

The Advantage Of Stock ROM:

  • Flash Stock To Unbrick your ZTE Blade V Plus

  • Flash Stock ROM to Fix the boot loop problem

  • Upgrade and Downgrade ZTE Blade V Plus

  • Unroot or Fix Bugs on your phone

  • To fix the lag or stutter on ZTE Blade V Plus

  • By flashing Stock ROM, you can solve software problems.

  • Revert back to stock to gain your warranty.

  • Official and Unofficial Lineage OS 14.1 Device List and Download Link

  • List Of Devices Getting Lineage OS 15.0 (Android 8.0 Oreo)

  • List of Supported devices for Lineage OS 15.1 (Android 8.1 Oreo)

  • Android Oreo is Here: List Of Official Supported Device

  • List of MIUI 9 Supported Devices – Official and Unofficial

  • List of All AOSP Android 8.0 Oreo Supported Device

  • Resurrection Remix Oreo Release Date: List of Supported device

READ THIS CAUTION:

Firmware Details:

  • Gapps File: Included

  • Device Supported: ZTE Blade V Plus

  • Tool Supported: SP Flash Tool

  • How To Install dotOS on Motorola Moto Z Play based on Android 8.1 Oreo

Steps to Install Stock Firmware on ZTE Blade V Plus:

Before installing, make sure to follow the pre-requisite and install the necessary drivers and tools on your PC.

Pre-requisites

  • Charge your phone: Before you proceed with the below information, you are recommended to ensure that your ZTE Blade V Plus is at least 50% charged.
  • Laptop or PC: To carry out this installation, you need PC or Laptop.
  • Take Device Backup: The very first thing to pay attention to is taking the device backup. You might not be able to take the backup of phone data, however, if you have inserted a memory card in your device, remove it at least to save it.
  • Smartphone Flash Tool: Download the latest SP Flash tool and extract it (Install)
  • VCOM driver: Download VCOM Driver and install on your computer (still compatible with MT67xx phones)
  • Install Latest Driver: Install the Latest ZTE USB Drivers. [For All Android USB Drivers]
  • Download: Download the below given required files on your PC.

[su_note note_color=”#fbf5c8″ text_color=”#000000″]

Disclaimer: We at Getdroidtips.com cannot be held responsible if anything goes wrong. Take your own risk!

[/su_note]

Instructions to Install on ZTE Blade V Plus:

Guide to Install Stock ROM using SP Flash tool

Guide to Install Stock ROM using SP Flash tool – Video Tutorial

I hope you installed the Stock ROM on ZTE Blade V Plus successfully, Now please rate this website with your comment. We always welcome feedback and improvements.