If you are using Chuwi Hipad smartphone and want to root then this guide is for you. You have to install TWRP Recovery and follow the full guide which we have mentioned step-by-step here. We have shared with you the guide to install TWRP Recovery on Chuwi Hipad and Root using Magisk/SU. After installing TWRP Recovery and gaining root access, you will be able to flash Custom ROMs, install Mods, perform backup and restore, and more.
Talking about the specifications, Chuwi HiPad features a 10.1-inch IPS display with a screen resolution of 1920x 1200 Pixels. It is powered by MediaTek Helio X27 (MT6797X) Processor coupled with 3GB of RAM. The phone packs 32GB internal memory with expandable storage support of 128GB via microSD card. The camera on the Chuwi HiPad comes with 5MP rear camera with LED dual-tone flash and 5MP front camera for selfies. It is backed by a Non-Removable Lithium-Polymer 7,000 mAh battery.
By installing any Custom Recovery and rooting your device, you can always customize or tweak your device. Additionally, you can install Custom ROMs, flash Mods, flash custom files, etc. TWRP is a custom recovery project which enables users to flash custom ROMs, install mods, root device and take complete backup.
What is TWRP Recovery?
TWRP term means “Team Win Recovery Project”. It gives the user to flash recovery files and ROM files easily with a simple and fully-featured UI. The TWRP is so much popular and widely used for Android devices via users and developers as well. Here we have mentioned some of the advantages of installing TWRP Recovery on your device.
Advantages of TWRP Recovery:
- Flash Custom ROM using TWRP.
- Flash modding zip files to customize your phone.
- Easy to flash and use Xposed Modules using TWRP.
- Root and Unroot using TWRP Recovery flashable zip SuperSU.
- You can install Magisk on Chuwi Hipad.
- Create and Restore Nandroid Backup using TWRP Recovery.
- Easy access to restore the Nandroid Backup.
- Flash the image file using TWRP Recovery on Chuwi Hipad.
- Remove all bloatware using TWRP Recovery on Chuwi Hipad.
- You can underclock and overclock.
- Perform clean Wipe, Cache, and Data.
Steps to Install TWRP Recovery on Chuwi Hipad
We will guide you on how to download and install TWRP recovery on Chuwi Hipad Android device. After successfully installing TWRP, you can install several Mods, flash ROMs, take backup & restores, and more. Follow the download links and requirements as well. Then check the full depth guide properly.
Pre-Requirements:
- This guide and file supported for Chuwi Hipad.
- You will require to unlock the device bootloader on Chuwi Hipad.
- Charge your device battery up to 60% for a smoother process.
- Take a complete backup of your device data.
- You will need a USB cable and a PC/Laptop to connect your phone.
Method 1: By SP Flash Tools
Follow the instructions given down below to install TWRP on your phone (need scatter text file):
Download Required Files:
- TWRP Recovery 3.2 for Chuwi Hipad
- No Verity opt Encrypt
- Download SuperSU Zip – For root using SuperSU
- Download Magisk Zip – For root using Magisk
- Download Drivers: Chuwi USB Driver | MTK USB Drivers
- Download SP Flash Tool
- Download ADB and Fastboot and install it on your PC
- Download Stock ROM for Chuwi Hipad
- Create Scatter txt file for your device
Warning!
Full Guide to install TWRP Recovery on your Phone
How to Install TWRP Recovery on Mediatek using SP Flash tool
Method 2: By ADB fastboot method
You will need to download some additional files to use this method.
Download ADB and Fastboot tool for Windows || For Mac: Click Here
Follow the instructions given down below to install TWRP on your phone:
- Download and install or extract the Android SDK or Minimal ADB Folder
- Go to C:\adb on the PC where the Android SDK folder is found
- Now, open the command window on the same ADB folder by pressing and holding the Shift key and right-click on an empty space inside the folder.
- Select the “Open PowerShell window here” or Command Window option.
- Switch off your phone completely and connect to the PC via a USB Cable.
- Next, Press and hold the Volume Down + Power key together for a few seconds to boot into Fastboot mode.
- Now enter the following command and hit enter:
fastboot flash recovery recovery.img
- Once you are done, you can reboot your phone using the following command:
fastboot reboot
That’s it! You have installed TWRP Successfully!
Steps to Root Chuwi Hipad
In order to root your phone, you need either a supported TWRP Recovery or any rooting apps. With the help of rooting apps, you can root Chuwi Hipad without PC or Computer. Here in this guide we already have a supported TWRP Recovery, so I will guide here to flash the superSU or Magisk to root your phone.
What is Rooting?
Rooting for Android means similar to the jailbreaking the device to get access to the root directory of your android mobile. It will give you the superuser power or access to use your device over Android subsystem and system apps.
Though sometimes rooting may void your device warranty as well. But it will give you some unleash power and access to change or edit the system settings, themes, icons, install other mod files, etc.
Advertisement
Advantages of Rooting:
- You can get access to all files on your Chuwi Hipad, even the files which present in the root directory of your phone.
- You can increase the performance of your Chuwi Hipad by overclocking.
- By rooting you can increase battery life by underclocking Chuwi Hipad.
- Uninstall Bloatware on Chuwi Hipad.
- You can block Ads on any Android applications such as Youtube and other game related applications.
- By Rooting Chuwi Hipad, you can View, Edit or Delete any system file inside the root directory.
- You can install the Xposed Framework and Xposed module support.
Steps to Root Chuwi Hipad:
Here is the guide on how to root Chuwi Hipad smartphone. Make sure to download either SuperSU or Magisk to root your phone.
We assume that you have successfully rooted or installed TWRP Recovery on Chuwi Hipad device. Feel free to write down in the comments below.
Important Note:
