How To Install Twrp Recovery On Zte Blade V10 And Root It Easily

Installing TWRP Recovery and Rooting your Android device now becomes quite easy and useful too. Here in this guide, we will share with you the steps on how to install TWRP Recovery and Root ZTE Blade V10 easily. The TWRP Recovery installation process will also require unlocking the device bootloader. So, we will share how to Unlock the ZTE Blade V10 Bootloader guide as well.

Talking about the specifications, ZTE Blade V10 features a 6.3-inch IPS LCD display with a screen resolution of 1080 x 2280 Pixels. It is powered by MediaTek Helio P70, a 64-bit Processor coupled with 3/4GB of RAM. The phone packs 32/64GB internal memory with expandable storage support of 128GB via microSD card. The camera on the ZTE Blade V10 comes with a Dual 16MP + 5MP rear camera with LED dual-tone flash and 32MP front camera for selfies. It is backed by a Non-Removable 3200 mAh Lithium-Polymer battery. ZTE Blade V10 also has a fingerprint sensor on the back.

TWRP Recovery and its Advantages

TWRP stands for Team Win Recovery Project. It basically lets the user flash custom recovery files, firmware files, root files easily on their Android smartphones. The firmware and other zip files can be easily flashed by this tool.

Meanwhile, you can also install or flash the custom recovery files, Xposed Modules, etc on your device. Additionally, creating the Nandroid backups & restores, factory reset, install GApps, etc can be done easily.

Now, let’s check how to Install TWRP Recovery and Root ZTE Blade V10 device.

Advantages of TWRP Recovery:

You can flash Custom ROM on ZTE Blade V10 using TWRP
You can flash modding zip files to customize your phone
Easy to flash and use Xposed Modules using TWRP
Easy to Root and Unroot using TWRP Recovery flashable zip SuperSU
You can install Magisk on ZTE Blade V10
Easy to Create and Restore Nandroid Backup using TWRP Recovery.
Easy access to restore the Nandroid Backup.
You can flash the image file using TWRP Recovery on ZTE Blade V10.
Easy to remove all bloatware using TWRP Recovery on ZTE Blade V10.
To underclock and overclock.
You can clean Wipe, Cache, and Data.

Steps to Install TWRP Recovery On ZTE Blade V10

Before going to the TWRP installation process, make sure to follow all the pre-requirements mentioned below properly.

Pre-Requirements:

The file and guide are supported for the ZTE Blade V10 model only. Don’t try it on other devices.
ZTE Blade V10 bootloader should be unlocked.
A PC/Laptop and a USB cable are required for this process.
Make sure to take a Full Backup of Device Data (No Root).
Download Magisk or SuperSU file for rooting. You can follow one method from below.
Charge your device battery to full.

Method 1: By SP Flash Tools

Follow the instructions given down below to install TWRP on your phone (need scatter text file):

Disclaimer:

Full Guide to install TWRP Recovery on your Phone

How to Install TWRP Recovery on Mediatek using SP Flash tool

Method 2: By ADB and Fastboot Tool

After downloading all the required files, drivers, and tools, follow the installation process.

First of all, enable the Developer Options and USB Debugging mode on your device.
Head over to the device Settings > System > About Phone > then tap on the Build Number for seven times to enable Developer options mode.
Now, go to the Developer options in the Settings menu and turn on the toggle to enable USB debugging.
Next, open the ADB & Fastboot folder on your computer. Then press and hold the Shift key and right mouse click to open the command window.
Turn off your device > Press and hold the Volume Up + Power button together for a few seconds to enter into Fastboot mode.
Connect your device with the PC via a USB cable and type the following code on the command windows and hit enter:

adb reboot bootloader

Now, your device is connected successfully as a fastboot device.
Type the following command and hit enter to check the fastboot device connected or not:

fastboot devices

Now, in order to install TWRP Recovery on your phone, type the following command and press enter:
To just boot, you can use the command fastboot boot twrpname.img
That’s it. You’ve successfully installed the TWRP Recovery on ZTE Blade V10 device. Now, you have to flash the Root.

What is Root? (Advantages)

Smartphone Rooting is the unofficial way to enable an administrator or superuser access to your device system and subsystem. Therefore, the user can easily tweak, change, edit, or delete system files and apps easily.

fastboot flash recovery twrpname.img

With the help of rooting, you can uninstall bloatware, increase device performance, reduce battery draining, install Xposed modules, and more. However, smartphone rooting will void the device warranty and you may not get software OTA updates anymore. Improper way of rooting can also brick your device easily. Therefore, make sure to follow the guide properly.

Steps to Root ZTE Blade V10

We assume that this full depth installation guide will be helpful to you. For any queries, feel free to ask in the comments below.

The advantage of Rooting:

You can get access to all files on your ZTE Blade V10, even the files which present in the root directory of your phone.
You can increase the performance of your ZTE Blade V10 by overclocking.
By rooting you can increase battery life by underclocking ZTE Blade V10.
Uninstall Bloatware on ZTE Blade V10.
You can block Ads on any Android applications such as Youtube and other game-related applications. Also Read: Top 5 Adblock Plus Alternatives for Android
By Rooting ZTE Blade V10, you can View, Edit or Delete any system file inside the root directory.
You can install Xposed Framework and many Xposed module support.

TWRP Recovery and its Advantages#

Advantages of TWRP Recovery:#

Steps to Install TWRP Recovery On ZTE Blade V10#

Pre-Requirements:#

Method 1: By SP Flash Tools#

Download Link:#

Method 2: By ADB and Fastboot Tool#

What is Root? (Advantages)#

Steps to Root ZTE Blade V10#

The advantage of Rooting:#